[QTY10] (15x28x7 mm) S6902-2RS Stainless HYBRID CERAMIC Ball Bearings BLK 6902RS

α:6 °; b:5.7 mm; Lubricant:Regular relubricatio; C:42.85 mm; da max.:65.2 mm; D:90.488 mm; Mass plain bearing:1.3 kg; b1:5 mm; d:57.15 mm; Basic static load rating C0:850 kN;

Accessories:Two Shields & Snap-R; Grease Speed Rating Open/Shielded n1:3100 rpm; Fillet Radius ra:2.50 mm; Oil Speed Rating Open/Shielded n2:3800 rpm; d:85.000 mm; Basic Static Radial Load Rating Co:146000 N; D:180.0000 mm; Basic Dynamic Radial Load Rating C:147000 N; B:41.00 mm;

Mass bearing:46 kg; Basic dynamic load rating C:1560 kN; B:24 mm; Basic static load rating C0:9300 kN; ra max.:2 mm; H:80 mm; Limiting speed:560 r/min; D:600 mm; Minimum axial load factor A:6.919; r1,2 min.:2.1 mm;

Dw:5 mm; Lw:23.8 mm; r1,2 min.:0.3 mm; r2 max.:1 mm; Mass needle roller:3.67 g; r1 max.:0.8 mm;

d:40  ; da:49 min; a:58 mm; d:40 mm; Pu:2.709 kN; Static (Cor):59.600 kN; rs (min):1.5 mm; Oil:5 600 min-1; Dynamic (Cr):59.431 kN; Da:81 max;

d:45.000 mm; Sealed Speed Rating n3:4000 rpm; D:120.0000 mm; B:29.00 mm; Fillet Radius ra:2.00 mm; Accessories:Two Shields & Snap-R; Basic Dynamic Radial Load Rating C:76100 N; Grease Speed Rating Open/Shielded n1:6000 rpm; Basic Static Radial Load Rating Co:45000 N; Oil Speed Rating Open/Shielded n2:7000 rpm;

Bearing (basic designation):23284; H:880 mm; L:1280 mm; Locating ring:2 x FRB 5/760; N4 max.:40 mm; P0°:8400 kN; ba min.:231 mm; Q180°:2900 kN; Q150°:3350 kN; Mass housing:850 kg;

Specific dynamic load factor K:150 N/mm²; b1:3.9 mm; da min.:38.8 mm; r1 min.:0.6 mm; C:22 mm; Material constant KM:330; Da min.:54.5 mm; Mass plain bearing:0.39 kg; α:15 °; b:3.9 mm;

Mass bearing:46 kg; Basic dynamic load rating C:1560 kN; B:24 mm; Basic static load rating C0:9300 kN; ra max.:2 mm; H:80 mm; Limiting speed:560 r/min; D:600 mm; Minimum axial load factor A:6.919; r1,2 min.:2.1 mm;

B:17 mm; r1,2 min.:2 mm; d1:160 mm; d:75 mm; Mass shaft washer:0.5 kg;

Mass bearing:46 kg; Basic dynamic load rating C:1560 kN; B:24 mm; Basic static load rating C0:9300 kN; ra max.:2 mm; H:80 mm; Limiting speed:560 r/min; D:600 mm; Minimum axial load factor A:6.919; r1,2 min.:2.1 mm;

B:17 mm; r1,2 min.:2 mm; d1:160 mm; d:75 mm; Mass shaft washer:0.5 kg;

B:120 mm; Da max.:420 mm; Calculation factor e:0.43; Db min.:415 mm; T:127 mm; Mass bearing:81.5 kg; Calculation factor Y0:0.8; D:440 mm; rb max.:3 mm; da max.:276 mm;

Dw:5 mm; Lw:23.8 mm; r1,2 min.:0.3 mm; r2 max.:1 mm; Mass needle roller:3.67 g; r1 max.:0.8 mm;