[QTY 4] 609-2RS (9x24x7 mm) Hybrid Ceramic Rubber Ball Bearing Bearings 609RS

Mass bearing unit:45.5 kg; J max.:412.75 mm; L:469.9 mm; B:168.275 mm; H1:139.7 mm; J min.:384.175 mm; s:84.138 mm; H:280.988 mm; Attachment bolt diameter G:22.225 mm; H2:79.375 mm;

Basic Dynamic Radial Load Rating C:92300 N; Grease Speed Rating n1:4800 rpm; Accessories:Seal & Snap-Ring; d:65.000 mm; Fillet Radius ra:2.00 mm; Oil Speed Rating Open/Shielded n2:5600 rpm; Basic Static Radial Load Rating Co:60000 N; Grease Speed Rating Open/Shielded n1:4800 rpm; B:33.00 mm; Sealed Speed Rating n3:3200 rpm;

P90°:207 kN; P120°:133 kN; RG:3/4 NPT; A1:158.75 mm; PG:1/4 NPT; Stabilizing ring:2 x 38151-38; Pa:42.9 kN; Cap bolt recommended tightening torque:813.5 N·m; Initial grease fill:793.8 g; A2:225.425 mm;

B:9.5 mm; Mass shaft washer:0.8 kg; d:150 mm; r1,2 min.:1 mm; d1:188 mm;

P120°:85.9 kN; L:628.65 mm; PosiTrac Plus contact element:2 x B10724-122; RG:3/4 NPT; Stabilizing ring:SR-0-28; A1:171.45 mm; N1:28.575 mm; PG:1/4 NPT; P180°:92.5 kN; P60°:234 kN;

D:130 mm; d2:60 mm; b:9 mm; rs (min):2.1 mm; b1:15.5 mm; Pu:13.900 kN; E:113 mm; r1s (min):2.1 mm; F:77 mm; B:31 mm;

Mass bearing unit:45.5 kg; J max.:412.75 mm; L:469.9 mm; B:168.275 mm; H1:139.7 mm; J min.:384.175 mm; s:84.138 mm; H:280.988 mm; Attachment bolt diameter G:22.225 mm; H2:79.375 mm;

B:9.5 mm; Mass shaft washer:0.8 kg; d:150 mm; r1,2 min.:1 mm; d1:188 mm;

E:mm; Static (Coa):203 kN; D:200 mm; b1:mm; B:33 mm; r1s (min):1.1 mm; rs (min):2 mm; d2 (max):mm; Dynamic (Ca):162 kN; b:mm;

Oil Speed Rating Open/Shielded n2:32000 rpm; B:8.00 mm; Sealed Speed Rating n3:17000 rpm; Grease Speed Rating Open/Shielded n1:26000 rpm; d:12.000 mm; Accessories:Snap-Ring; Basic Dynamic Radial Load Rating C:5070 N; D:28.0000 mm; Basic Static Radial Load Rating Co:2360 N; Fillet Radius ra:0.30 mm;

B:9.5 mm; Mass shaft washer:0.8 kg; d:150 mm; r1,2 min.:1 mm; d1:188 mm;

d2 ≈:1225 mm; Limiting speed:260 r/min; Basic static load rating C0:31500 kN; d:1120 mm; da min.:1148 mm; D1 ≈:1362 mm; D:1460 mm; Reference speed:200 r/min; ra max.:6 mm; B:335 mm;

Adapter sleeve assembly:SNW 7x1.1/4; Taconite seal:TER 15; Initial grease fill:36.855 g; A2:153.988 mm; R2:12.7 mm; Cap bolt, SAE grade:5; H1:50.8 mm; J max.:155.575 mm; Max. speed for Taconite seal:2250 r/min; H2:20.637 mm;

P90°:207 kN; P120°:133 kN; RG:3/4 NPT; A1:158.75 mm; PG:1/4 NPT; Stabilizing ring:2 x 38151-38; Pa:42.9 kN; Cap bolt recommended tightening torque:813.5 N·m; Initial grease fill:793.8 g; A2:225.425 mm;

Fatigue load limit Pu:285 kN; Basic dynamic load rating C:2485 kN; Calculation factor Y0:1.8; Da max.:383 mm; D:400 mm; B1:181 mm; Mass bearing + sleeve:93 kg; Calculation factor Y2:2.9; G1:30 mm; B:144 mm;