ZLE5201-2Z Stud type track rollers

Mass adapter sleeve assembly:0.34 kg; d:55 mm; d1:50 mm; Hydraulic nut:HMV 11 E; B1:45 mm; B:14 mm; Lock nut:KMFE 11; d3:75 mm; G:M 55x2;

B:6.00 mm; Sealed Speed Rating n3:18000 rpm; Oil Speed Rating Open/Shielded n2:36000 rpm; D:24.0000 mm; Fillet Radius ra:0.30 mm; Grease Speed Rating Open/Shielded n1:30000 rpm; Accessories:Two Shields; Basic Dynamic Radial Load Rating C:2910 N; d:12.000 mm; Basic Static Radial Load Rating Co:1500 N;

Fatigue load limit Pu:25 kN; ra max.:2 mm; Da max.:483 mm; H:60 mm; D:540 mm; d1 ≈:536 mm; Basic dynamic load rating C:238 kN; Limiting speed:1000 r/min; r1,2 min.:2.1 mm; D1 ≈:444 mm;

Da:74.6 mm; Thread grub screw G2:M6x0.75; L:95 mm; A1:15 mm; End cover:ECY 205; A3:3.2 mm; Fatigue load limit Pu:0.335 kN; Recommended diameter for attachment bolts, mm G:10 mm; Housing:FYK 505; N:12.3 mm;

ba:34.131 mm; Da:140 mm; Initial grease fill:87.885 g; Pa:33.8 kN; J1:53.975 mm; h:31.75 mm; L:330.2 mm; Housing:FSAFS 216; H2:31.75 mm; H1:88.9 mm;

ba:34.131 mm; Da:140 mm; Initial grease fill:87.885 g; Pa:33.8 kN; J1:53.975 mm; h:31.75 mm; L:330.2 mm; Housing:FSAFS 216; H2:31.75 mm; H1:88.9 mm;

Mass adapter sleeve assembly:0.34 kg; d:55 mm; d1:50 mm; Hydraulic nut:HMV 11 E; B1:45 mm; B:14 mm; Lock nut:KMFE 11; d3:75 mm; G:M 55x2;

Basic dynamic load rating C:426 kN; Da max.:149.5 mm; 2B:70 mm; Limiting speed:3800 r/min; K:7.5 mm; Calculation factor Y1:1.5; Calculation factor Y0:1.4; Ca min.:6 mm; Reference speed:2600 r/min; Calculation factor e:0.44;

Da:74.6 mm; Thread grub screw G2:M6x0.75; L:95 mm; A1:15 mm; End cover:ECY 205; A3:3.2 mm; Fatigue load limit Pu:0.335 kN; Recommended diameter for attachment bolts, mm G:10 mm; Housing:FYK 505; N:12.3 mm;

Da:74.6 mm; Thread grub screw G2:M6x0.75; L:95 mm; A1:15 mm; End cover:ECY 205; A3:3.2 mm; Fatigue load limit Pu:0.335 kN; Recommended diameter for attachment bolts, mm G:10 mm; Housing:FYK 505; N:12.3 mm;

Fatigue load limit Pu:25 kN; ra max.:2 mm; Da max.:483 mm; H:60 mm; D:540 mm; d1 ≈:536 mm; Basic dynamic load rating C:238 kN; Limiting speed:1000 r/min; r1,2 min.:2.1 mm; D1 ≈:444 mm;

Taconite seal (dc shaft position):TER 134; H2:63.5 mm; h:50.8 mm; Pa:62.3 kN; Max. speed for Taconite seal:460 r/min; Appropriate attachment bolt size G:1 in; A1:158.75 mm; Taconite seal (db shaft position):TER 151; db:168.275 mm; J max.:463.55 mm;

Basic Dynamic Radial Load Rating C:307000 N; Basic Static Radial Load Rating Co:400000 N; Fillet Radius rb:1.00 mm; Fillet Radius ra:3.00 mm; B:104.00 mm; Oil Speed Rating n2:3000 rpm; Grease Speed Rating n1:2600 rpm; D:210.0000 mm; d:85.000 mm;

Basic Dynamic Radial Load Rating C:307000 N; Basic Static Radial Load Rating Co:400000 N; Fillet Radius rb:1.00 mm; Fillet Radius ra:3.00 mm; B:104.00 mm; Oil Speed Rating n2:3000 rpm; Grease Speed Rating n1:2600 rpm; D:210.0000 mm; d:85.000 mm;

Basic Dynamic Radial Load Rating C:307000 N; Basic Static Radial Load Rating Co:400000 N; Fillet Radius rb:1.00 mm; Fillet Radius ra:3.00 mm; B:104.00 mm; Oil Speed Rating n2:3000 rpm; Grease Speed Rating n1:2600 rpm; D:210.0000 mm; d:85.000 mm;