Bearing 29384

K:12 mm; Calculation factor e:0.31; Basic static load rating C0:3450 kN; Mass bearing:115 kg; Reference speed:1000 r/min; Basic dynamic load rating C:2839 kN; Da max.:440 mm; ra max.:4 mm; Calculation factor Y0:2.2; b:22.3 mm;

K:12 mm; Calculation factor e:0.31; Basic static load rating C0:3450 kN; Mass bearing:115 kg; Reference speed:1000 r/min; Basic dynamic load rating C:2839 kN; Da max.:440 mm; ra max.:4 mm; Calculation factor Y0:2.2; b:22.3 mm;

Initial grease fill:1304.1 g; P180°:202 kN; P90°:320 kN; P150°:173 kN; Cap bolt, SAE grade:8; Bearing limiting speed:2600 r/min; Labyrinth ring:2 x LOR 149; Da:319.999 mm; Eye bolt:2 x 3/8-16 UNC; P60°:535 kN;

Fillet Radius rb:1.00 mm; Fillet Radius ra:2.00 mm; Grease Speed Rating n1:3800 rpm; B:58.00 mm; Basic Static Radial Load Rating Co:110000 N; D:120.0000 mm; Oil Speed Rating n2:5000 rpm; d:45.000 mm; Basic Dynamic Radial Load Rating C:138000 N;

M3:22 mm; M:21 mm; M1:7 mm; Spring washer in accordance with DIN 128:A 20; B:50 mm; Hexagonal head bolt:M 20x40; M2:61 mm; Mass locking clip:0.27 kg;

Basic static load rating C0:15.3 kN; B1:39.5 mm; RG:1/4-28 UNF; J7:15 mm; J6:106 mm; Basic dynamic load rating C:25.5 kN; L:96 mm; d2:57 mm; H:156 mm; Recommended tightening torque for grub screw:4 N·m;

R2:30.163 mm; J1:69.85 mm; P180°:81.4 kN; Cap bolt:2 x 1-8 UNC; Cap bolt, SAE grade:8; A2:254 mm; H2:53.975 mm; Ca:82.804 mm; P60°:185 kN; Bearing:1320 K;

Initial grease fill:1304.1 g; P180°:202 kN; P90°:320 kN; P150°:173 kN; Cap bolt, SAE grade:8; Bearing limiting speed:2600 r/min; Labyrinth ring:2 x LOR 149; Da:319.999 mm; Eye bolt:2 x 3/8-16 UNC; P60°:535 kN;

Oil Speed Rating Open/Shielded n2:29000 rpm; d:12.700 mm; Fillet Radius ra:0.41 mm; D:28.6000 mm; Basic Static Radial Load Rating Co:2400 N; Sealed Speed Rating n3:16000 rpm; Basic Dynamic Radial Load Rating C:5070 N; Shielded or Sealed B1:7.9 mm; Width Plain B:6.4 mm; Accessories:Two Seals;

P150°:77 kN; h:54.769 mm; Housing:SAW 534; J min.:492.125 mm; S:4.763 mm; H:360.363 mm; P60°:234 kN; Pa:56 kN; J1:107.95 mm; PosiTrac Plus contact element:2 x B10724-130;

M3:22 mm; M:21 mm; M1:7 mm; Spring washer in accordance with DIN 128:A 20; B:50 mm; Hexagonal head bolt:M 20x40; M2:61 mm; Mass locking clip:0.27 kg;

Cap bolt:2 x 3/4-10 UNC; h:45.244 mm; J1:69.85 mm; da:96.838 mm; ba:50.006 mm; Pa:17.3 kN; Cap bolt recommended tightening torque:203.4 N·m; Cap bolt, SAE grade:5; P180°:60.9 kN; Bearing limiting speed:4000 r/min;

P150°:77 kN; h:54.769 mm; Housing:SAW 534; J min.:492.125 mm; S:4.763 mm; H:360.363 mm; P60°:234 kN; Pa:56 kN; J1:107.95 mm; PosiTrac Plus contact element:2 x B10724-130;

M3:22 mm; M:21 mm; M1:7 mm; Spring washer in accordance with DIN 128:A 20; B:50 mm; Hexagonal head bolt:M 20x40; M2:61 mm; Mass locking clip:0.27 kg;

Cap bolt:2 x 3/4-10 UNC; h:45.244 mm; J1:69.85 mm; da:96.838 mm; ba:50.006 mm; Pa:17.3 kN; Cap bolt recommended tightening torque:203.4 N·m; Cap bolt, SAE grade:5; P180°:60.9 kN; Bearing limiting speed:4000 r/min;