WHEEL BEARING KIT SKODA SUPERB (3U4) 2.0 TDI 140BHP Top German Quality

P120°:13.3 kN; H1:82.55 mm; N1:15.875 mm; Cap bolt recommended tightening torque:149.1 N·m; J1:50.8 mm; L:279.4 mm; Pa:6.94 kN; Labyrinth ring:2 x LER 25; H:157.162 mm; A2:123.825 mm;

r3,4 min.:2.5 mm; Calculation factor Y:1.4; Basic dynamic load rating C:304 kN; Limiting speed:3600 r/min; D:180 mm; Da min.:157 mm; Db min.:168 mm; Ca min.:5 mm; d:100 mm; ra max.:3 mm;

D:52.0000 mm; Basic Dynamic Radial Load Rating C:16800 N; Fillet Radius ra:1.00 mm; d:25.000 mm; Grease Speed Rating n1:11000 rpm; B:18.00 mm; Basic Static Radial Load Rating Co:4400 N; Oil Speed Rating n2:14000 rpm;

Grease Speed Rating n1:11000 rpm; Oil Speed Rating n2:14000 rpm; B:17.00 mm; Fillet Radius ra:1.00 mm; Sealed Speed Rating n3:7500 rpm; d:25.000 mm; Basic Dynamic Radial Load Rating C:21200 N; Accessories:One Seal; Basic Static Radial Load Rating Co:10800 N; Grease Speed Rating Open/Shielded n1:11000 rpm;

P120°:13.3 kN; H1:82.55 mm; N1:15.875 mm; Cap bolt recommended tightening torque:149.1 N·m; J1:50.8 mm; L:279.4 mm; Pa:6.94 kN; Labyrinth ring:2 x LER 25; H:157.162 mm; A2:123.825 mm;

J1:85.725 mm; H2:60.325 mm; Initial grease fill:481.95 g; P150°:85.9 kN; End plug (suffix Y):EPR 18; Eye bolt:3/8-16 UNC; P90°:149 kN; N1:28.575 mm; J min.:396.875 mm; Cap bolt recommended tightening torque:400 N·m;

r3,4 min.:2.5 mm; Calculation factor Y:1.4; Basic dynamic load rating C:304 kN; Limiting speed:3600 r/min; D:180 mm; Da min.:157 mm; Db min.:168 mm; Ca min.:5 mm; d:100 mm; ra max.:3 mm;

Stabilizing ring:SR-30-0; A1:158.75 mm; PG:1/4 NPT; Cap bolt, SAE grade:5; J max.:463.55 mm; H:317.5 mm; A2:279.4 mm; L:539.75 mm; N1:28.575 mm; da:133.35 mm;

P120°:13.3 kN; H1:82.55 mm; N1:15.875 mm; Cap bolt recommended tightening torque:149.1 N·m; J1:50.8 mm; L:279.4 mm; Pa:6.94 kN; Labyrinth ring:2 x LER 25; H:157.162 mm; A2:123.825 mm;

d:45 mm; d1 ≈:52 mm; C:25 mm; b1:4.6 mm; Specific dynamic load factor K:150 N/mm²; Specific static load factor K0:500 N/mm²; Mass plain bearing:0.49 kg; Material constant KM:330; Da max.:63.6 mm; B:40 mm;

D:52.0000 mm; Basic Dynamic Radial Load Rating C:16800 N; Fillet Radius ra:1.00 mm; d:25.000 mm; Grease Speed Rating n1:11000 rpm; B:18.00 mm; Basic Static Radial Load Rating Co:4400 N; Oil Speed Rating n2:14000 rpm;

Basic dynamic load rating C:104 kN; Dimension series:2DE; C:22 mm; Calculation factor Y:1.7; r3,4 min.:1.5 mm; Basic static load rating C0:106 kN; D:72 mm; rb max.:1.5 mm; B:28 mm; Calculation factor e:0.35;

Stabilizing ring:SR-30-0; A1:158.75 mm; PG:1/4 NPT; Cap bolt, SAE grade:5; J max.:463.55 mm; H:317.5 mm; A2:279.4 mm; L:539.75 mm; N1:28.575 mm; da:133.35 mm;