[1 pc] 9*22*7 Hybrid Ceramic Si3N4 Ball Bearing 9x22x7 mm

rs Dynamic (Cr):2.1 mm; Static (Cor):81.680 kN; D:160 mm; B1:mm; B:37 mm; d:75 mm; with tapered bore:1315  ; Oil:3 800 min-1; Pu:29.900 kN; Grease:1.230 kN;

d:9 mm; Mass inner ring:0.0044 kg; r, r1,2 min.:0.3 mm; B:12 mm; F:12 mm;

d:9 mm; Mass inner ring:0.0044 kg; r, r1,2 min.:0.3 mm; B:12 mm; F:12 mm;

rs Dynamic (Cr):2.1 mm; Static (Cor):81.680 kN; D:160 mm; B1:mm; B:37 mm; d:75 mm; with tapered bore:1315  ; Oil:3 800 min-1; Pu:29.900 kN; Grease:1.230 kN;

B:75 mm; r2 min.:1 mm; da max.:87.2 mm; da min.:87.2 mm; Sealing solution:Triple-lip seals; d:80 mm; Lubricant:Regular relubricatio; D:130 mm; Mass plain bearing:4.1 kg; Design (sliding contact surface combination):Steel/steel, heavy-d;

Da max.:580 mm; F:422 mm; Calculation factor kr:0.36; d:360 mm; s max.:5.9 mm; da max.:414 mm; Reference speed:900 r/min; Mass bearing:275 kg; D:600 mm; Limiting speed:1100 r/min;

b1:42.6 mm; Pu:175.330 kN; b:19.6 mm; Dynamic (Ca):1470 kN; rs (min):5 mm; B:90 mm; r1s (min):5 mm; d2 (max):470 mm; E:mm; D:600 mm;

Basic Static Radial Load Rating Co:65500 N; Accessories:Shield & Seal; d:105.000 mm; Grease Speed Rating Open/Shielded n1:4000 rpm; B:26.00 mm; D:160.0000 mm; Basic Dynamic Radial Load Rating C:79300 N; Fillet Radius ra:2.00 mm; Oil Speed Rating Open/Shielded n2:4800 rpm; Sealed Speed Rating n3:2400 rpm;

b1:42.6 mm; Pu:175.330 kN; b:19.6 mm; Dynamic (Ca):1470 kN; rs (min):5 mm; B:90 mm; r1s (min):5 mm; d2 (max):470 mm; E:mm; D:600 mm;

Housing:FSAF 520; L:387.35 mm; P180°:48.9 kN; J1:60.325 mm; P60°:119 kN; Bearing limiting speed:4500 r/min; Cap bolt recommended tightening torque:203.4 N·m; Bearing:22220 EK; P150°:40 kN; PG:1/4 NPT;

P90°:82.7 kN; Appropriate attachment bolt size G:0.75 in; Cap bolt:2 x 5/8-11 UNC; PG:1/8 NPT; H2:31.75 mm; A2:215.9 mm; P120°:49.8 kN; Ca:42.799 mm; Pa:7.83 kN; R1:53.181 mm;

B:75 mm; r2 min.:1 mm; da max.:87.2 mm; da min.:87.2 mm; Sealing solution:Triple-lip seals; d:80 mm; Lubricant:Regular relubricatio; D:130 mm; Mass plain bearing:4.1 kg; Design (sliding contact surface combination):Steel/steel, heavy-d;

B:140 mm; Tolerance shaft:e7; Permissible sliding velocity v min.:0 m/s; a:7 mm; Coefficient of friction µ min.:0.08; Permissible sliding velocity v max.:0.5 m/s; Mass bushing:9.68 kg; Specific dynamic load factor K:25 N/mm²; d:240 mm; h:242.5 mm;

b1:42.6 mm; Pu:175.330 kN; b:19.6 mm; Dynamic (Ca):1470 kN; rs (min):5 mm; B:90 mm; r1s (min):5 mm; d2 (max):470 mm; E:mm; D:600 mm;

rs Dynamic (Cr):2.1 mm; Static (Cor):81.680 kN; D:160 mm; B1:mm; B:37 mm; d:75 mm; with tapered bore:1315  ; Oil:3 800 min-1; Pu:29.900 kN; Grease:1.230 kN;