HongKong Royal Machinery Parts Co.,Ltd. 
HongKong Royal Machinery Parts Co.,Ltd. 
ASAHI BEARINGS   FYH BEARINGS   IKO BEARINGS  
  • Home
  • Product Categories
    • ASAHI BEARINGS
    • FYH BEARINGS
    • IKO BEARINGS
    • KAYDON BEARINGS
    • KOYO BEARING
    • NACHI BEARINGS
    • NMB BEARINGS
    • NSK BEARINGS
    • NTN BEARINGS
    • TIMKEN BEARING
    • UBC BEARING
    • FAG BEARINGS
    • Hydraulics Pump
    • National Oil Seal
    • Mcgill Bearing
    • Bearing distributor
    • Bearing authorized supplier
    • railway bearings
    • Oilfield mud pump bearings
    • Oil Industry Drilling Bearing
    • Thin Section Bearings
    • Bearings for Oil Production & Drilling
    • FAG Bearings
    • Double row double row tapered roller bearings (inch series)
    • Double direction thrust tapered roller bearings
    • Four row tapered roller bearings
    • Multi-Row Roller Bearings NTN
    • Four Row Cylindrical Roller Bearings NTN
    • SL Type Cylindrical Roller Bearings NTN
    • SL Type Cylindrical Roller Bearings for Sheaves NTN
    • Single Row Tapered Roller Bearings NTN
    • Double Row Tapered Roller Bearings NTN
    • Four Row Tapered Roller Bearings NTN
    • Spherical Roller Bearings NTN
    • Thrust Bearings NTN
    • Bearings for special applications NTN
    • DOUBLE-ROW CYLINDRICAL ROLLER BEARINGS NSK
    • FULL-COMPLEMENT CYLINDRICAL ROLLER BEARINGS NSK
    • SINGLE-ROW TAPERED ROLLER BEARINGS NSK
    • YUKEN Piston pump
    • DOUBLE-ROW TAPERED ROLLER BEARINGS NSK
    • SPHERICAL ROLLER BEARINGS NSK
    • SINGLE-DIRECTION THRUST BALL BEARINGS NSK
    • CYLINDRICAL ROLLER THRUST BEARINGS NSK
    • TAPERED ROLLER THRUST BEARINGS NSK
    • SPHERICAL THRUST ROLLER BEARINGS NSK
    • ROLLING BEARINGS FOR STEEL MILLS NSK
    • SEALED-CLEAN FOUR-ROW TAPERED ROLLER BEARINGS NSK
    • FOUR-ROW CYLINDRICAL ROLLER BEARINGS NSK
    • DOUBLE-ROW TAPERED ROLLER BEARINGS NSK
    • Roll Bearings for Mills NSK
    • CROSSED-ROLLER BEARINGS NSK
    • Ball Bearings NSK
    • TAPERED ROLLER THRUST BEARINGS For Adjusting Screws NSK
    • Roller Bearings NSK
    • Thin Section Bearings Kaydon
  • Company Profile
    • Company Introduction
  • Technical Articles
  • Contact Us

Home>Products>Mcgill Bearing>Yamaha FZ6-NHG (No ABS) (5S53) 2008 Koyo Rear Right Wheel Bearing

English
English العربية Deutsch Ελληνικά Español Français Bahasa Indonesia Italiano 日本語 Português Русский язык Shqip Svenska ไทย Türkçe Українська
  • Yamaha FZ6-NHG (No ABS) (5S53) 2008 Koyo Rear Right Wheel Bearing
  • Yamaha FZ6-NHG (No ABS) (5S53) 2008 Koyo Rear Right Wheel Bearing

Yamaha FZ6-NHG (No ABS) (5S53) 2008 Koyo Rear Right Wheel Bearing

  • 65 mm
  • 351 kN
  • 3 mm
  • 2.1 mm
  • 48 mm
  • 3 400 min-1
  • 2 600 min-1
  • 5.5 mm
Contact NowWhatsApp
HongKong Royal Machinery Parts Co.,Ltd. 

JaysonChina

  • Jayson2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

Product Details

d: 65 mm Grease: 351 kN Dynamic (Cr): 3 mm
rs (min): 2.1 mm B: 48 mm with tapered bore: 3 400 min-1
with cylindrical bore: 2 600 min-1 Static (Cor): 5.5 mm D: 140 mm
Oil: 42.180 kN

Product Description

Initial grease fill82.215 g
R217.462 mm
Max. speed for Taconite seal2175 r/min
P60°35.1 kN
PG1/8 NPT
H134.938 mm
ba25.4 mm
Cap bolt recommended tightening torque149.1 N·m
P180°14.7 kN
A169.85 mm

Documented Solution Program Yamaha FZ6-NHG (No ABS) (5S53) 2008 Koyo Rear Right Wheel Bearing


  • NU310 Nachi Cylindrical Roller Bearing Made in Japan

    M1:7 mm; B:60 mm; M:21 mm; Spring washer in accordance with DIN 128:A 20; M2:44 mm; M3:22 mm; Mass locking clip:0.26 kg; Hexagonal head bolt:M 20x40;
    Read More ...

  • NU330 Nachi Roller 150mm x 320mm x 65mm Steel Cage Japan Cylindrical Bearings

    H2:53.975 mm; Ca:67.793 mm; Initial grease fill:379.89 g; Adapter sleeve assembly:SNW 24x4.1/8; da:104.775 mm; Da:215.001 mm; Cap bolt recommended tightening torque:298.3 N·m; Bearing limiting speed:3800 r/min; End plug (suffix Y):EPR 14; Bearing:22224 EK;
    Read More ...

  • OFNA Jammin SCRT Ceramic Rubber Sealed Bearing Kit

    Fillet Radius rb:1.00 mm; Fillet Radius ra:2.50 mm; Basic Dynamic Radial Load Rating C:307000 N; D:360.0000 mm; Oil Speed Rating n2:2000 rpm; d:240.000 mm; Grease Speed Rating n1:0 rpm; B:56.00 mm; Basic Static Radial Load Rating Co:455000 N;
    Read More ...

  • OFNA HYPER 9 Ceramic Ball Bearing Kit by World Champions ACER Racing

    d:65 mm; Grease:351 kN; Dynamic (Cr):3 mm; rs (min):2.1 mm; B:48 mm; with tapered bore:3 400 min-1; with cylindrical bore:2 600 min-1; Static (Cor):5.5 mm; D:140 mm; Oil:42.180 kN;
    Read More ...

  • NTN WPS106GRC BALL INSERT BEARING FACTORY !

    Fillet Radius rb:0.15 mm; Basic Static Radial Load Rating Co:11600 N; B:18.00 mm; Basic Dynamic Radial Load Rating C:15300 N; Fillet Radius ra:0.30 mm; D:37.0000 mm; Grease Speed Rating n1:33000 rpm; Oil Speed Rating n2:50000 rpm; d:20.000 mm;
    Read More ...

  • NU328EG Nachi Cylindrical Roller Bearing 140x300x62 Nylon Cage Japan Large 10470

    Accessories:One Seal & Snap-Ring; Fillet Radius ra:1.00 mm; D:62.0000 mm; Basic Static Radial Load Rating Co:28000 N; B:27.00 mm; Oil Speed Rating n2:9500 rpm; Sealed Speed Rating n3:7000 rpm; Grease Speed Rating n1:7000 rpm; Basic Dynamic Radial Load Rating C:30300 N; d:30.000 mm;
    Read More ...

  • NU224MY Nachi Cylindrical Bearing Japan 120x215x40 Large Bearings

    Db:35.6 mm; Limiting speed:13000 r/min; F:35 mm; Da:42.5 mm; db:34.5 mm; D:47 mm; Basic dynamic load rating C:23.3 kN; s max.:0.8 mm; B:16 mm; Fatigue load limit Pu:4.5 kN;
    Read More ...

  • OFNA Pirate 10 RTR .12 Ceramic Rubber Sealed Bearing Kit

    Fillet Radius ra:0.30 mm; B:10.00 mm; Oil Speed Rating n2:25000 rpm; Grease Speed Rating n1:0 rpm; Basic Static Radial Load Rating Co:4250 N; d:17.000 mm; D:35.0000 mm; Fillet Radius rb:0.10 mm; Basic Dynamic Radial Load Rating C:7610 N;
    Read More ...

  • NU320EG Nachi Roller 100mm x 215mm x 47mm Nylon Cage Japan Large Cylindrical Bea

    Oil Speed Rating n2:6300 rpm; Basic Static Radial Load Rating Co:39000 N; Fillet Radius ra:1.00 mm; Grease Speed Rating n1:4800 rpm; Sealed Speed Rating n3:4800 rpm; D:90.0000 mm; Basic Dynamic Radial Load Rating C:48800 N; d:50.000 mm; Accessories:One Seal; B:30.20 mm;
    Read More ...

  • NUTR30 TIMKEN TORRINGTON bearing

    Oil Speed Rating n2:6300 rpm; Basic Static Radial Load Rating Co:39000 N; Fillet Radius ra:1.00 mm; Grease Speed Rating n1:4800 rpm; Sealed Speed Rating n3:4800 rpm; D:90.0000 mm; Basic Dynamic Radial Load Rating C:48800 N; d:50.000 mm; Accessories:One Seal; B:30.20 mm;
    Read More ...

  • NUP232-E-M1 FAG Cylindrical roller bearings NUP2..-E main dimensions to DIN 541

    Initial grease fill:82.215 g; R2:17.462 mm; Max. speed for Taconite seal:2175 r/min; P60°:35.1 kN; PG:1/8 NPT; H:134.938 mm; ba:25.4 mm; Cap bolt recommended tightening torque:149.1 N·m; P180°:14.7 kN; A1:69.85 mm;
    Read More ...

  • OPTIMAL 972617 RADLAGERSATZ

    Fillet Radius rb:0.15 mm; Basic Static Radial Load Rating Co:11600 N; B:18.00 mm; Basic Dynamic Radial Load Rating C:15300 N; Fillet Radius ra:0.30 mm; D:37.0000 mm; Grease Speed Rating n1:33000 rpm; Oil Speed Rating n2:50000 rpm; d:20.000 mm;
    Read More ...

  • Original Bulktex® NSK Lager Ball Bearing B22 - 27 - C3 - NSK Kugellager Motor

    G:M 75x2; d1:65 mm; d:70 mm; Nut for removal:KM 15; Mass withdrawal sleeve:0.24 kg; G1:8 mm; Hydraulic nut:HMV 15 E; B2:47 mm; B1:43 mm;
    Read More ...

  • NTN-SNR 32222 Single row tapered roller bearing bore 110mm OD 200mm **

    H2:53.975 mm; Ca:67.793 mm; Initial grease fill:379.89 g; Adapter sleeve assembly:SNW 24x4.1/8; da:104.775 mm; Da:215.001 mm; Cap bolt recommended tightening torque:298.3 N·m; Bearing limiting speed:3800 r/min; End plug (suffix Y):EPR 14; Bearing:22224 EK;
    Read More ...

  • NU421-M1 FAG Cylindrical roller bearings NU4 main dimensions to DIN 5412-1 non

    Dw:2 mm; r2 max.:0.8 mm; r1 max.:0.6 mm; Mass needle roller:0.24 g; Lw:9.8 mm; r1,2 min.:0.2 mm;
    Read More ...

Contact Us

HongKong Royal Machinery Parts Co.,Ltd. 
Email[email protected]
AddressNathan 25-26, Tsimshatsui Kowloon Hongkong
Phone(Working Time)0065-31591338
Fax00852-95172259
  • HongKong Royal Machinery Parts Co.,Ltd. 
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

Related News

Application guide for spherical bearings and housings
Vertical seats P, LP: Suitable for most transmissions and machines with shafts parallel to the mounting surface . Square seat F, FS: It is generally installed on the side wall of the machine. It has simple structure and convenient installation. It is the...
The difference between deep groove ball bearings and angular contact ball bearings
Deep groove ball bearings: The representative rolling bearing is widely used to withstand radial load and bidirectional axial load. It is suitable for high-speed rotation and low noise and low vibration. Pre-filled with sealed bearing with steel dust...
Introduction to the use of tapered roller bearings
Tapered roller bearings mainly bear radial and axial combined loads. The bearing capacity of the bearing depends on the raceway angle of the outer ring. The larger the angle, the greater the load carrying capacity. This type of bearing is a split type...

Product Categories

  • ASAHI BEARINGS
  • FYH BEARINGS
  • IKO BEARINGS
  • KAYDON BEARINGS
  • KOYO BEARING
  • NACHI BEARINGS
  • NMB BEARINGS
  • NSK BEARINGS
  • NTN BEARINGS
  • TIMKEN BEARING
  • UBC BEARING
  • FAG BEARINGS
  • Hydraulics Pump
  • National Oil Seal
  • Mcgill Bearing
  • Bearing distributor
  • Bearing authorized supplier
  • railway bearings
  • Oilfield mud pump bearings
  • Oil Industry Drilling Bearing
  • Thin Section Bearings
  • Bearings for Oil Production & Drilling
  • FAG Bearings
  • Double row double row tapered roller bearings (inch series)
  • Double direction thrust tapered roller bearings
  • Four row tapered roller bearings
  • Multi-Row Roller Bearings NTN
  • Four Row Cylindrical Roller Bearings NTN
  • SL Type Cylindrical Roller Bearings NTN
  • SL Type Cylindrical Roller Bearings for Sheaves NTN
  • Single Row Tapered Roller Bearings NTN
  • Double Row Tapered Roller Bearings NTN
  • Four Row Tapered Roller Bearings NTN
  • Spherical Roller Bearings NTN
  • Thrust Bearings NTN
  • Bearings for special applications NTN
  • DOUBLE-ROW CYLINDRICAL ROLLER BEARINGS NSK
  • FULL-COMPLEMENT CYLINDRICAL ROLLER BEARINGS NSK
  • SINGLE-ROW TAPERED ROLLER BEARINGS NSK
  • YUKEN Piston pump
  • DOUBLE-ROW TAPERED ROLLER BEARINGS NSK
  • SPHERICAL ROLLER BEARINGS NSK
  • SINGLE-DIRECTION THRUST BALL BEARINGS NSK
  • CYLINDRICAL ROLLER THRUST BEARINGS NSK
  • TAPERED ROLLER THRUST BEARINGS NSK
  • SPHERICAL THRUST ROLLER BEARINGS NSK
  • ROLLING BEARINGS FOR STEEL MILLS NSK
  • SEALED-CLEAN FOUR-ROW TAPERED ROLLER BEARINGS NSK
  • FOUR-ROW CYLINDRICAL ROLLER BEARINGS NSK
  • DOUBLE-ROW TAPERED ROLLER BEARINGS NSK
  • Roll Bearings for Mills NSK
  • CROSSED-ROLLER BEARINGS NSK
  • Ball Bearings NSK
  • TAPERED ROLLER THRUST BEARINGS For Adjusting Screws NSK
  • Roller Bearings NSK
  • Thin Section Bearings Kaydon
More

New Products

  • OFNA Pirate 10 RTR .12 Ceramic Rubber Sealed Bearing Kit
  • OFNA Jammin SCRT Ceramic Rubber Sealed Bearing Kit
  • OFNA HYPER 9 Ceramic Ball Bearing Kit by World Champions ACER Racing
  • Original Bulktex® NSK Lager Ball Bearing B22 - 27 - C3 - NSK Kugellager Motor
  • OPTIMAL 972617 RADLAGERSATZ
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

HongKong Royal Machinery Parts Co.,Ltd. . Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Product Categories
    • ASAHI BEARINGS
    • FYH BEARINGS
    • IKO BEARINGS
    • KAYDON BEARINGS
    • KOYO BEARING
    • NACHI BEARINGS
    • NMB BEARINGS
    • NSK BEARINGS
    • NTN BEARINGS
    • TIMKEN BEARING
    • UBC BEARING
    • FAG BEARINGS
    • Hydraulics Pump
    • National Oil Seal
    • Mcgill Bearing
    • Bearing distributor
    • Bearing authorized supplier
    • railway bearings
    • Oilfield mud pump bearings
    • Oil Industry Drilling Bearing
    • Thin Section Bearings
    • Bearings for Oil Production & Drilling
    • FAG Bearings
    • Double row double row tapered roller bearings (inch series)
    • Double direction thrust tapered roller bearings
    • Four row tapered roller bearings
    • Multi-Row Roller Bearings NTN
    • Four Row Cylindrical Roller Bearings NTN
    • SL Type Cylindrical Roller Bearings NTN
    • SL Type Cylindrical Roller Bearings for Sheaves NTN
    • Single Row Tapered Roller Bearings NTN
    • Double Row Tapered Roller Bearings NTN
    • Four Row Tapered Roller Bearings NTN
    • Spherical Roller Bearings NTN
    • Thrust Bearings NTN
    • Bearings for special applications NTN
    • DOUBLE-ROW CYLINDRICAL ROLLER BEARINGS NSK
    • FULL-COMPLEMENT CYLINDRICAL ROLLER BEARINGS NSK
    • SINGLE-ROW TAPERED ROLLER BEARINGS NSK
    • YUKEN Piston pump
    • DOUBLE-ROW TAPERED ROLLER BEARINGS NSK
    • SPHERICAL ROLLER BEARINGS NSK
    • SINGLE-DIRECTION THRUST BALL BEARINGS NSK
    • CYLINDRICAL ROLLER THRUST BEARINGS NSK
    • TAPERED ROLLER THRUST BEARINGS NSK
    • SPHERICAL THRUST ROLLER BEARINGS NSK
    • ROLLING BEARINGS FOR STEEL MILLS NSK
    • SEALED-CLEAN FOUR-ROW TAPERED ROLLER BEARINGS NSK
    • FOUR-ROW CYLINDRICAL ROLLER BEARINGS NSK
    • DOUBLE-ROW TAPERED ROLLER BEARINGS NSK
    • Roll Bearings for Mills NSK
    • CROSSED-ROLLER BEARINGS NSK
    • Ball Bearings NSK
    • TAPERED ROLLER THRUST BEARINGS For Adjusting Screws NSK
    • Roller Bearings NSK
    • Thin Section Bearings Kaydon
  • Company Profile
    • Company Introduction
  • Technical Articles
  • Contact Us
Contact Us