Zipp Vuma Quad Bottom Bracket Ceramic Bearings English Thread 68mm - !

Oil:4 200 min-1; Dynamic (Cr):144.000 kN; Da:176 max; Bearing designation:6318  ; ra:2.5 max; B:43 mm; rs:3 mm; da:103 min; Static (Cor):108.000 kN; Pu:4.149 kN;

d:130.000 mm; D:180.0000 mm; B:24.00 mm; Basic Dynamic Radial Load Rating C:65000 N; Accessories:Two Seals; Fillet Radius ra:1.50 mm; Grease Speed Rating Open/Shielded n1:3400 rpm; Oil Speed Rating Open/Shielded n2:4000 rpm; Sealed Speed Rating n3:2100 rpm; Basic Static Radial Load Rating Co:67000 N;

s1:22.2 mm; Calculation factor f0:14; d:30.163 mm; Rubber seating ring:RIS 206 A; Limiting speed1):3800 r/min; Fatigue load limit Pu:0.475 kN; C:18 mm; Hexagonal key size for grub screw N:3.175 mm; D:62 mm; Mass complete bearing:0.3 kg;

d:75.000 mm; B:71.40 mm; Oil Speed Rating n2:3600 rpm; Basic Static Radial Load Rating Co:140000 N; D:160.0000 mm; Basic Dynamic Radial Load Rating C:168000 N; Sealed Speed Rating n3:2600 rpm; Grease Speed Rating n1:2600 rpm; Fillet Radius ra:2.00 mm; Accessories:One Seal;

with cylindrical bore:670 min-1; Grease:4280 kN; rs (min):4 mm; Static (Cor):11.1 mm; d:280 mm; with tapered bore:850 min-1; D:420 mm; Dynamic (Cr):6 mm; B:140 mm; Pu:2240 kN;

P120°:127 kN; S:4.763 mm; Pa:43.6 kN; ba:74.612 mm; P150°:113 kN; A1:171.45 mm; Ca:95.809 mm; Cap bolt:1-8 UNC; P60°:345 kN; Adapter sleeve assembly:SNW 34x5.13/16;

Appropriate attachment bolt size G:0.75 in; RG:3/8 NPT; End plug (suffix Y):EPR 14; Pa:16.7 kN; Housing:FSAF 024 KA; A1:111.125 mm; Adapter sleeve assembly:SNW 3024x4.1/4; Cap bolt:2 x 3/4-10 UNC; P120°:44.5 kN; Initial grease fill:181.44 g;

Oil:4 200 min-1; Dynamic (Cr):144.000 kN; Da:176 max; Bearing designation:6318  ; ra:2.5 max; B:43 mm; rs:3 mm; da:103 min; Static (Cor):108.000 kN; Pu:4.149 kN;

d:31.75 mm; Hexagonal key size for grub screw N:3.175 mm; A1:25 mm; Housing:SYWK 506 Y; Recommended diameter for attachment bolts, inch G:0.5 in; A:40 mm; B4:5 mm; J:121 mm; Bearing:YAR 206-104-2RF/VE49; Recommended diameter for attachment bolts, mm G:12 mm;

Grease Speed Rating n1:0 rpm; Fillet Radius rb:0.60 mm; Basic Static Radial Load Rating Co:72000 N; Basic Dynamic Radial Load Rating C:71500 N; Fillet Radius ra:1.50 mm; B:24.00 mm; D:145.0000 mm; Oil Speed Rating n2:4700 rpm; d:95.000 mm;

with cylindrical bore:670 min-1; Grease:4280 kN; rs (min):4 mm; Static (Cor):11.1 mm; d:280 mm; with tapered bore:850 min-1; D:420 mm; Dynamic (Cr):6 mm; B:140 mm; Pu:2240 kN;

P120°:127 kN; S:4.763 mm; Pa:43.6 kN; ba:74.612 mm; P150°:113 kN; A1:171.45 mm; Ca:95.809 mm; Cap bolt:1-8 UNC; P60°:345 kN; Adapter sleeve assembly:SNW 34x5.13/16;

h:44.45 mm; R2:38.1 mm; da:152.4 mm; Mass pillow block:87.5 kg; Cap bolt, SAE grade:8; J min.:406.4 mm; PG:1/4 NPT; P90°:180 kN; A1:149.225 mm; Da:259.999 mm;

Grease Speed Rating n1:0 rpm; Fillet Radius rb:0.60 mm; Basic Static Radial Load Rating Co:72000 N; Basic Dynamic Radial Load Rating C:71500 N; Fillet Radius ra:1.50 mm; B:24.00 mm; D:145.0000 mm; Oil Speed Rating n2:4700 rpm; d:95.000 mm;

Oil:4 200 min-1; Dynamic (Cr):144.000 kN; Da:176 max; Bearing designation:6318  ; ra:2.5 max; B:43 mm; rs:3 mm; da:103 min; Static (Cor):108.000 kN; Pu:4.149 kN;