[QTY 2] (7x17x5 mm) 697-2RS HYBRID CERAMIC Si3N4 Ball Bearing (Black) 697RS

Dynamic (Ca):260 kN; D:160 mm; r2s (min):0.6 mm; r1s (min):2 mm; Pu:49.600 kN; d2:105 mm; rs (min):2.5 mm; Static (Coa):445 kN; a:31 mm; B:43 mm;

d1:36.513 mm; B:11.379 mm; Lock nut:N 09; Mass adapter sleeve assembly:0.32 kg; B1:53.924 mm; Sleeve:S 109x1.7/16; Lock washer:W 09; G:44.882 mm; d:45 mm; d3 max.:64.414 mm;

Cap bolt, SAE grade:8; ba:25.4 mm; Pa:3.4 kN; Housing:SAF 609; da:38.1 mm; L:244.475 mm; Taconite seal:TER 18; Cap bolt:2 x 1/2-13 UNC; A1:69.85 mm; Da:100 mm;

Material constant KM:330; α:6 °; G:M 72x4; Basic static load rating C0:490 kN; l2 max.:349 mm; d:70 mm; l7 min.:85 mm; h:265 mm; dk:92 mm; Basic dynamic load rating C:315 kN;

Dynamic (Ca):260 kN; D:160 mm; r2s (min):0.6 mm; r1s (min):2 mm; Pu:49.600 kN; d2:105 mm; rs (min):2.5 mm; Static (Coa):445 kN; a:31 mm; B:43 mm;

Weight W:1.20 kg; Diameter N:12.7 mm; Insert Bearing IB:ZMaRC; Dimension L:108.0 mm; Shaft Diameter D:30 mm; Dimension A2:15.1 mm; Dimension A1:32.5 mm; Basic Static Radial Load Rating Co:11200 N; Distance J:82.6 mm; Height T:42.2 mm;

J max.:298.45 mm; A2:149.225 mm; Stabilizing ring:2 x SR-1518; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt:2 x 5/8-11 UNC; ba:34.925 mm; P60°:121 kN; Bearing:1218; R2:27.781 mm; Housing:SAF 218;

J max.:298.45 mm; A2:149.225 mm; Stabilizing ring:2 x SR-1518; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt:2 x 5/8-11 UNC; ba:34.925 mm; P60°:121 kN; Bearing:1218; R2:27.781 mm; Housing:SAF 218;

B:145 mm; Limiting speed:2100 r/min; Basic dynamic load rating C:2839 kN; Calculation factor Y2:3.3; D:460 mm; Calculation factor Y1:2.2; Fatigue load limit Pu:260 kN; Da max.:440 mm; d:220 mm; Calculation factor e:0.31;

Housing:FSAF 215; da:75 mm; h:31.75 mm; J1:47.625 mm; J min.:219.075 mm; Ca:37.008 mm; J max.:244.475 mm; R1:46.038 mm; Labyrinth ring (dc shaft position):LOR 46; RG:1/4 NPT;

d1:36.513 mm; B:11.379 mm; Lock nut:N 09; Mass adapter sleeve assembly:0.32 kg; B1:53.924 mm; Sleeve:S 109x1.7/16; Lock washer:W 09; G:44.882 mm; d:45 mm; d3 max.:64.414 mm;

Weight W:1.20 kg; Diameter N:12.7 mm; Insert Bearing IB:ZMaRC; Dimension L:108.0 mm; Shaft Diameter D:30 mm; Dimension A2:15.1 mm; Dimension A1:32.5 mm; Basic Static Radial Load Rating Co:11200 N; Distance J:82.6 mm; Height T:42.2 mm;

Oil Speed Rating Open/Shielded n2:13000 rpm; d:30.000 mm; Sealed Speed Rating n3:7500 rpm; D:62.0000 mm; Accessories:Removable Metal Shie; Basic Static Radial Load Rating Co:11400 N; Fillet Radius ra:1.00 mm; B:23.81 mm; Grease Speed Rating Open/Shielded n1:10000 rpm; Basic Dynamic Radial Load Rating C:20800 N;

Limiting speed:1800 r/min; d2 ≈:268 mm; da min.:229 mm; Operating clearance factor k2:0.097; Fatigue load limit Pu:245 kN; G1:23 mm; Misalignment factor k1:0.114; B:120 mm; r1,2 min.:4 mm; s1 max.:22.3 mm;

Cap bolt, SAE grade:8; ba:25.4 mm; Pa:3.4 kN; Housing:SAF 609; da:38.1 mm; L:244.475 mm; Taconite seal:TER 18; Cap bolt:2 x 1/2-13 UNC; A1:69.85 mm; Da:100 mm;