[QTY 1] (30x37x4 mm) 6706-2RS HYBRID CERAMIC Si3N4 Ball Bearing Bearings 6706RS

P90°:82.7 kN; Appropriate attachment bolt size G:0.75 in; Cap bolt:2 x 5/8-11 UNC; PG:1/8 NPT; H2:31.75 mm; A2:215.9 mm; P120°:49.8 kN; Ca:42.799 mm; Pa:7.83 kN; R1:53.181 mm;

Recommended grub screw tightening torque:8 N·m; B3:3 mm; Mass lock nut:0.12 kg; d3:58 mm; Grub (set) screw size:M6; b:6 mm; Axial static load carrying capacity:62 kN; G:M 40x1.5; Associated spanner:HN 8-9; h:2.5 mm;

Taconite seal:TER 122; Initial grease fill:878.85 g; da:125.412 mm; Mass pillow block:134 kg; Adapter sleeve assembly:SNW 128x4.15/16; Cap bolt, SAE grade:5; A2:307.975 mm; N1:28.575 mm; P60°:234 kN; S:4.763 mm;

d:9 mm; Mass inner ring:0.0044 kg; r, r1,2 min.:0.3 mm; B:12 mm; F:12 mm;

B:75 mm; r2 min.:1 mm; da max.:87.2 mm; da min.:87.2 mm; Sealing solution:Triple-lip seals; d:80 mm; Lubricant:Regular relubricatio; D:130 mm; Mass plain bearing:4.1 kg; Design (sliding contact surface combination):Steel/steel, heavy-d;

rs Dynamic (Cr):2.1 mm; Static (Cor):81.680 kN; D:160 mm; B1:mm; B:37 mm; d:75 mm; with tapered bore:1315  ; Oil:3 800 min-1; Pu:29.900 kN; Grease:1.230 kN;

Basic Static Radial Load Rating Co:65500 N; Accessories:Shield & Seal; d:105.000 mm; Grease Speed Rating Open/Shielded n1:4000 rpm; B:26.00 mm; D:160.0000 mm; Basic Dynamic Radial Load Rating C:79300 N; Fillet Radius ra:2.00 mm; Oil Speed Rating Open/Shielded n2:4800 rpm; Sealed Speed Rating n3:2400 rpm;

d:180 mm; H:34 mm; dynamic Cr:165.640 kN; Grease:1 100 min-1; Oil:1 500 min-1; rs (min):1.1 mm; Pu:20.410 kN; D1:185 mm; static Cor:639.000 kN; D:225 mm;

Recommended grub screw tightening torque:8 N·m; B3:3 mm; Mass lock nut:0.12 kg; d3:58 mm; Grub (set) screw size:M6; b:6 mm; Axial static load carrying capacity:62 kN; G:M 40x1.5; Associated spanner:HN 8-9; h:2.5 mm;

B:140 mm; Tolerance shaft:e7; Permissible sliding velocity v min.:0 m/s; a:7 mm; Coefficient of friction µ min.:0.08; Permissible sliding velocity v max.:0.5 m/s; Mass bushing:9.68 kg; Specific dynamic load factor K:25 N/mm²; d:240 mm; h:242.5 mm;

b1:42.6 mm; Pu:175.330 kN; b:19.6 mm; Dynamic (Ca):1470 kN; rs (min):5 mm; B:90 mm; r1s (min):5 mm; d2 (max):470 mm; E:mm; D:600 mm;

P90°:82.7 kN; Appropriate attachment bolt size G:0.75 in; Cap bolt:2 x 5/8-11 UNC; PG:1/8 NPT; H2:31.75 mm; A2:215.9 mm; P120°:49.8 kN; Ca:42.799 mm; Pa:7.83 kN; R1:53.181 mm;

b1:42.6 mm; Pu:175.330 kN; b:19.6 mm; Dynamic (Ca):1470 kN; rs (min):5 mm; B:90 mm; r1s (min):5 mm; d2 (max):470 mm; E:mm; D:600 mm;

Taconite seal:TER 122; Initial grease fill:878.85 g; da:125.412 mm; Mass pillow block:134 kg; Adapter sleeve assembly:SNW 128x4.15/16; Cap bolt, SAE grade:5; A2:307.975 mm; N1:28.575 mm; P60°:234 kN; S:4.763 mm;

B:140 mm; Tolerance shaft:e7; Permissible sliding velocity v min.:0 m/s; a:7 mm; Coefficient of friction µ min.:0.08; Permissible sliding velocity v max.:0.5 m/s; Mass bushing:9.68 kg; Specific dynamic load factor K:25 N/mm²; d:240 mm; h:242.5 mm;