Bearing EE641198D-265-266D

P180°:57.4 kN; Adapter sleeve assembly:SNW 3024x4.1/8; PG:1/4 NPT; R2:30.163 mm; H:222.25 mm; Ca:55.804 mm; Initial grease fill:181.44 g; Pa:16.7 kN; RG:3/8 NPT; R1:65.088 mm;

A2:41.275 mm; P60°:101 kN; L:349.25 mm; Mass pillow block:23.1 kg; Bearing:23218 CCK/W33; P120°:38.3 kN; Housing:SAW 518; da:82.55 mm; S:4.763 mm; P150°:34.7 kN;

B:22.00 mm; Oil Speed Rating Open/Shielded n2:6000 rpm; d:85.000 mm; Basic Dynamic Radial Load Rating C:52700 N; Fillet Radius ra:1.00 mm; Sealed Speed Rating n3:3000 rpm; Basic Static Radial Load Rating Co:45000 N; D:130.0000 mm; Grease Speed Rating Open/Shielded n1:5000 rpm; Accessories:Without Accessories;

P180°:57.4 kN; Adapter sleeve assembly:SNW 3024x4.1/8; PG:1/4 NPT; R2:30.163 mm; H:222.25 mm; Ca:55.804 mm; Initial grease fill:181.44 g; Pa:16.7 kN; RG:3/8 NPT; R1:65.088 mm;

H:34 mm; d:170 mm; Grease:1 200 min-1; dynamic Cr:160.140 kN; static Cor:582.000 kN; rs (min):1.1 mm; D:215 mm; d1:213 mm; D1:172 mm; Oil:1 600 min-1;

P180°:57.4 kN; Adapter sleeve assembly:SNW 3024x4.1/8; PG:1/4 NPT; R2:30.163 mm; H:222.25 mm; Ca:55.804 mm; Initial grease fill:181.44 g; Pa:16.7 kN; RG:3/8 NPT; R1:65.088 mm;

P180°:57.4 kN; Adapter sleeve assembly:SNW 3024x4.1/8; PG:1/4 NPT; R2:30.163 mm; H:222.25 mm; Ca:55.804 mm; Initial grease fill:181.44 g; Pa:16.7 kN; RG:3/8 NPT; R1:65.088 mm;

Basic Dynamic Radial Load Rating C:48800 N; d:55.000 mm; Grease Speed Rating n1:5600 rpm; B:21.00 mm; Oil Speed Rating n2:7500 rpm; Fillet Radius rb:1.00 mm; D:100.0000 mm; Fillet Radius ra:1.50 mm; Basic Static Radial Load Rating Co:37500 N;

A5:29.369 mm; Basic dynamic load rating C:73.8 kN; d2:62.706 mm; A1:73.819 mm; A:58.737 mm; Limiting speed:5100 r/min; A6:19.05 mm; Mass bearing unit:4.54 kg; N1:14.287 mm; L:136.525 mm;

α:6 °; h:265 mm; l7 min.:85 mm; Basic static load rating C0:490 kN; r1 min.:1 mm; Specific dynamic load factor K:300 N/mm²; B:49 mm; dk:92 mm; C1 max.:43 mm; d2 max.:162 mm;

da:71.438 mm; PG:1/4 NPT; Adapter sleeve assembly:SNW 117x2.13/16; A1:111.125 mm; P60°:94.3 kN; R2:30.163 mm; Mass pillow block:31.4 kg; Pa:10.5 kN; PosiTrac Plus contact element:2 x B10724-184; Labyrinth ring:2 x LOR 182;

H:34 mm; d:170 mm; Grease:1 200 min-1; dynamic Cr:160.140 kN; static Cor:582.000 kN; rs (min):1.1 mm; D:215 mm; d1:213 mm; D1:172 mm; Oil:1 600 min-1;

P150°:26.7 kN; End plug (suffix Y):EPR 9; A1:88.9 mm; Mass pillow block:24.5 kg; R2:22.225 mm; da:76.2 mm; H:187.325 mm; RG:3/8 NPT; H1:95.25 mm; S:4.763 mm;

Specific dynamic load factor K:25 N/mm²; Tolerance shaft:e7; Specific static load factor K0:45 N/mm²; Coefficient of friction µ max.:0.15; α:124 °; Permissible sliding velocity v max.:0.5 m/s; B:160 mm; Permissible sliding velocity v min.:0 m/s; h:172 mm; d:170 mm;

B:23 mm; d:50 mm; rs Dynamic (Cr):1.1 mm; Pu:8.410 kN; with tapered bore:2210  ; B1:mm; Oil:7 100 min-1; with cylindrical bore:8 400 min-1; Static (Cor):24.000 kN; D:90 mm;