Bearings Cylindrical Roller Bearings NN3032

Tolerance housing:H7; d:12 mm; B:10 mm; Specific dynamic load factor K:25 N/mm²; B1:3 mm; Mass bushing:0.016 kg; Permissible sliding velocity v min.:0 m/s; D:18 mm; Coefficient of friction µ min.:0.08; Tolerance shaft:e7;

Tolerance housing:H7; d:12 mm; B:10 mm; Specific dynamic load factor K:25 N/mm²; B1:3 mm; Mass bushing:0.016 kg; Permissible sliding velocity v min.:0 m/s; D:18 mm; Coefficient of friction µ min.:0.08; Tolerance shaft:e7;

Cap bolt:1 1/4-7 UNC; L:749.3 mm; Bearing limiting speed:2200 r/min; End plug (suffix Y):EPR 22; Stabilizing ring:SR-40-34; S:4.763 mm; R1:122.237 mm; Labyrinth ring (db shaft position):LOR 175; Cap bolt recommended tightening torque:2467.6 N·m; Ca:107.798 mm;

Cap bolt:1 1/4-7 UNC; L:749.3 mm; Bearing limiting speed:2200 r/min; End plug (suffix Y):EPR 22; Stabilizing ring:SR-40-34; S:4.763 mm; R1:122.237 mm; Labyrinth ring (db shaft position):LOR 175; Cap bolt recommended tightening torque:2467.6 N·m; Ca:107.798 mm;

r1s (min):2.1 mm; Static (Coa):310 kN; s:4.1 mm; B:51 mm; Pu:36.740 kN; Dynamic (Ca):282 kN; D:150 mm; rs (min):2.1 mm; d2 (max):mm; d2:70 mm;

d:110.000 mm; D:240.0000 mm; Basic Static Radial Load Rating Co:475000 N; Basic Dynamic Radial Load Rating C:371000 N; Oil Speed Rating n2:2800 rpm; Grease Speed Rating n1:2200 rpm; Fillet Radius ra:2.50 mm; B:100.00 mm; Fillet Radius rb:1.00 mm;

Housing:FYTBK 507; Bearing:YELAG 207; Recommended diameter for attachment bolts, inch G:0.5 in; Basic dynamic load rating C:25.5 kN; J:130 mm; Thread grub screw G2:M10x1; End cover:ECY 207; B1:51.1 mm; B4:6.75 mm; A:35 mm;

Oil Speed Rating Open/Shielded n2:3600 rpm; d:110.000 mm; Grease Speed Rating Open/Shielded n1:3000 rpm; Accessories:Two Seals & Snap-Rin; B:38.00 mm; Fillet Radius ra:2.00 mm; Oil Speed Rating n2:3600 rpm; Basic Dynamic Radial Load Rating C:143000 N; Sealed Speed Rating n3:2000 rpm; Grease Speed Rating n1:3000 rpm;

Housing:FYTBK 507; Bearing:YELAG 207; Recommended diameter for attachment bolts, inch G:0.5 in; Basic dynamic load rating C:25.5 kN; J:130 mm; Thread grub screw G2:M10x1; End cover:ECY 207; B1:51.1 mm; B4:6.75 mm; A:35 mm;

B:36 mm; r, r1,2 min.:0.6 mm; F:42 mm; Mass inner ring:0.12 kg; d:35 mm;

r1s (min):2.1 mm; Static (Coa):310 kN; s:4.1 mm; B:51 mm; Pu:36.740 kN; Dynamic (Ca):282 kN; D:150 mm; rs (min):2.1 mm; d2 (max):mm; d2:70 mm;