SCE1212-PP Drawn cup needle roller bearings with open ends

Taconite seal (dc shaft position):TER 134; H2:63.5 mm; h:50.8 mm; Pa:62.3 kN; Max. speed for Taconite seal:460 r/min; Appropriate attachment bolt size G:1 in; A1:158.75 mm; Taconite seal (db shaft position):TER 151; db:168.275 mm; J max.:463.55 mm;

Basic Dynamic Radial Load Rating C:104000 N; Grease Speed Rating Open/Shielded n1:4500 rpm; Oil Speed Rating n2:5300 rpm; Grease Speed Rating n1:4500 rpm; B:35.00 mm; Oil Speed Rating Open/Shielded n2:5300 rpm; Sealed Speed Rating n3:3000 rpm; Fillet Radius ra:2.00 mm; Accessories:Shield & Seal; D:150.0000 mm;

Taconite seal (dc shaft position):TER 134; H2:63.5 mm; h:50.8 mm; Pa:62.3 kN; Max. speed for Taconite seal:460 r/min; Appropriate attachment bolt size G:1 in; A1:158.75 mm; Taconite seal (db shaft position):TER 151; db:168.275 mm; J max.:463.55 mm;

Appropriate attachment bolt size G:1 in; Ca:102.794 mm; Labyrinth ring:2 x LOR 147; Cap bolt:4 x 3/4-10 UNC; Max. speed for PosiTrac Plus seal:875 r/min; Cap bolt recommended tightening torque:203.4 N·m; R1:104.775 mm; A2:222.25 mm; L:558.8 mm; End plug (suffix Y):EPR 19;

Mass adapter sleeve assembly:0.34 kg; d:55 mm; d1:50 mm; Hydraulic nut:HMV 11 E; B1:45 mm; B:14 mm; Lock nut:KMFE 11; d3:75 mm; G:M 55x2;

Appropriate attachment bolt size G:1 in; Ca:102.794 mm; Labyrinth ring:2 x LOR 147; Cap bolt:4 x 3/4-10 UNC; Max. speed for PosiTrac Plus seal:875 r/min; Cap bolt recommended tightening torque:203.4 N·m; R1:104.775 mm; A2:222.25 mm; L:558.8 mm; End plug (suffix Y):EPR 19;

Mass adapter sleeve assembly:0.34 kg; d:55 mm; d1:50 mm; Hydraulic nut:HMV 11 E; B1:45 mm; B:14 mm; Lock nut:KMFE 11; d3:75 mm; G:M 55x2;

ba:34.131 mm; Da:140 mm; Initial grease fill:87.885 g; Pa:33.8 kN; J1:53.975 mm; h:31.75 mm; L:330.2 mm; Housing:FSAFS 216; H2:31.75 mm; H1:88.9 mm;

Appropriate attachment bolt size G:1 in; Ca:102.794 mm; Labyrinth ring:2 x LOR 147; Cap bolt:4 x 3/4-10 UNC; Max. speed for PosiTrac Plus seal:875 r/min; Cap bolt recommended tightening torque:203.4 N·m; R1:104.775 mm; A2:222.25 mm; L:558.8 mm; End plug (suffix Y):EPR 19;

Taconite seal (dc shaft position):TER 134; H2:63.5 mm; h:50.8 mm; Pa:62.3 kN; Max. speed for Taconite seal:460 r/min; Appropriate attachment bolt size G:1 in; A1:158.75 mm; Taconite seal (db shaft position):TER 151; db:168.275 mm; J max.:463.55 mm;

Basic Dynamic Radial Load Rating C:270000 N; Fillet Radius rb:1.00 mm; Basic Static Radial Load Rating Co:305000 N; d:105.000 mm; Oil Speed Rating n2:3000 rpm; Grease Speed Rating n1:2600 rpm; B:72.00 mm; Fillet Radius ra:2.00 mm; D:190.0000 mm;

Da:74.6 mm; Thread grub screw G2:M6x0.75; L:95 mm; A1:15 mm; End cover:ECY 205; A3:3.2 mm; Fatigue load limit Pu:0.335 kN; Recommended diameter for attachment bolts, mm G:10 mm; Housing:FYK 505; N:12.3 mm;

Basic Dynamic Radial Load Rating C:307000 N; Basic Static Radial Load Rating Co:400000 N; Fillet Radius rb:1.00 mm; Fillet Radius ra:3.00 mm; B:104.00 mm; Oil Speed Rating n2:3000 rpm; Grease Speed Rating n1:2600 rpm; D:210.0000 mm; d:85.000 mm;

Taconite seal (dc shaft position):TER 134; H2:63.5 mm; h:50.8 mm; Pa:62.3 kN; Max. speed for Taconite seal:460 r/min; Appropriate attachment bolt size G:1 in; A1:158.75 mm; Taconite seal (db shaft position):TER 151; db:168.275 mm; J max.:463.55 mm;

Mass adapter sleeve assembly:0.34 kg; d:55 mm; d1:50 mm; Hydraulic nut:HMV 11 E; B1:45 mm; B:14 mm; Lock nut:KMFE 11; d3:75 mm; G:M 55x2;