Bearing 800RV1032

rs (min):6 mm; Oil:822.160 kN; d:400 mm; B:250 mm; Pu:5410 kN; Grease:11150 kN; with cylindrical bore:180 min-1; Dynamic (Cr):12 mm; Static (Cor):22.3 mm; with tapered bore:240 min-1;

Sealed Speed Rating n3:2400 rpm; Grease Speed Rating Open/Shielded n1:3600 rpm; Grease Speed Rating n1:3600 rpm; D:170.0000 mm; Oil Speed Rating Open/Shielded n2:4300 rpm; Oil Speed Rating n2:4300 rpm; Basic Static Radial Load Rating Co:81500 N; Basic Dynamic Radial Load Rating C:108000 N; B:32.00 mm; d:95.000 mm;

rs (min):6 mm; Oil:822.160 kN; d:400 mm; B:250 mm; Pu:5410 kN; Grease:11150 kN; with cylindrical bore:180 min-1; Dynamic (Cr):12 mm; Static (Cor):22.3 mm; with tapered bore:240 min-1;

Fillet Radius ra:2.00 mm; Grease Speed Rating n1:4800 rpm; d:65.000 mm; Sealed Speed Rating n3:3200 rpm; Oil Speed Rating n2:5600 rpm; B:33.00 mm; Basic Static Radial Load Rating Co:60000 N; D:140.0000 mm; Oil Speed Rating Open/Shielded n2:5600 rpm; Basic Dynamic Radial Load Rating C:92300 N;

Fillet Radius ra:2.00 mm; Grease Speed Rating n1:4800 rpm; d:65.000 mm; Sealed Speed Rating n3:3200 rpm; Oil Speed Rating n2:5600 rpm; B:33.00 mm; Basic Static Radial Load Rating Co:60000 N; D:140.0000 mm; Oil Speed Rating Open/Shielded n2:5600 rpm; Basic Dynamic Radial Load Rating C:92300 N;

Oil:7 100 min-1; ra:1 max; d:30 mm; Static (Cor):36.200 kN; da:37 min; Da:65 max; d:30  ; B:30.2 mm; Dynamic (Cr):43.688 kN; Pu:1.645 kN;

d1 ≈:740 mm; Thrust factor K:1.84; D1 ≈:905 mm; Calculation factor e:0.31; B:610 mm; Design variant/feature:TQON/GW; Fatigue load limit Pu:2500 kN; T:610 mm; r3,4 min.:10 mm; Comparative axial load rating CFa:679 kN;

Static axial stiffness, preload class A:52 N/µm; Basic dynamic load rating C:7.15 kN; B:12 mm; Mass bearing:0.067 kg; rb max.:0.3 mm; Calculation factor f2C:1.06; r3,4 min.:0.3 mm; a:13.2 mm; D2:36.5 mm; Ball diameter Dw:6.35 mm;

P180°:285 kN; h:79.375 mm; ba:90.487 mm; H1:241.3 mm; Cap bolt, SAE grade:8; Cap bolt recommended tightening torque:4284.4 N·m; Taconite seal (dc shaft position):TER 170; RG:1 NPT; Taconite seal (db shaft position):TER 179; Initial grease fill:2749.95 g;

d1 ≈:740 mm; Thrust factor K:1.84; D1 ≈:905 mm; Calculation factor e:0.31; B:610 mm; Design variant/feature:TQON/GW; Fatigue load limit Pu:2500 kN; T:610 mm; r3,4 min.:10 mm; Comparative axial load rating CFa:679 kN;

B2 ≈:91 mm; Calculation factor e:0.37; B:69 mm; d2 ≈:123 mm; Basic dynamic load rating C:539 kN; ra max.:2 mm; D:180 mm; D1 ≈:153 mm; b:6 mm; Fatigue load limit Pu:78 kN;

Oil:7 100 min-1; ra:1 max; d:30 mm; Static (Cor):36.200 kN; da:37 min; Da:65 max; d:30  ; B:30.2 mm; Dynamic (Cr):43.688 kN; Pu:1.645 kN;

Cap bolt, SAE grade:8; h:73.025 mm; Housing:SAFS 056 KAUA; Cap bolt recommended tightening torque:4284.4 N·m; J1:139.7 mm; R2:50.8 mm; da:266.7 mm; P120°:249 kN; Cap bolt:4 x 1 1/2-6 UNC; R1:163.512 mm;

Oil:7 100 min-1; ra:1 max; d:30 mm; Static (Cor):36.200 kN; da:37 min; Da:65 max; d:30  ; B:30.2 mm; Dynamic (Cr):43.688 kN; Pu:1.645 kN;

r3,4 min.:6.4 mm; Basic dynamic load rating C:10600 kN; Calculation factor Y2:3; Design variant/feature:TQO/GWI; d1 ≈:653 mm; D:813.562 mm; r1,2 min.:3.3 mm; Thrust factor K:1.76; Comparative axial load rating CFa:455 kN; Mass bearing:715 kg;