Bearing 380RV5401

Oil:7 100 min-1; ra:1 max; d:30 mm; Static (Cor):36.200 kN; da:37 min; Da:65 max; d:30  ; B:30.2 mm; Dynamic (Cr):43.688 kN; Pu:1.645 kN;

d1 ≈:740 mm; Thrust factor K:1.84; D1 ≈:905 mm; Calculation factor e:0.31; B:610 mm; Design variant/feature:TQON/GW; Fatigue load limit Pu:2500 kN; T:610 mm; r3,4 min.:10 mm; Comparative axial load rating CFa:679 kN;

Static axial stiffness, preload class A:52 N/µm; Basic dynamic load rating C:7.15 kN; B:12 mm; Mass bearing:0.067 kg; rb max.:0.3 mm; Calculation factor f2C:1.06; r3,4 min.:0.3 mm; a:13.2 mm; D2:36.5 mm; Ball diameter Dw:6.35 mm;

d1 ≈:740 mm; Thrust factor K:1.84; D1 ≈:905 mm; Calculation factor e:0.31; B:610 mm; Design variant/feature:TQON/GW; Fatigue load limit Pu:2500 kN; T:610 mm; r3,4 min.:10 mm; Comparative axial load rating CFa:679 kN;

Static axial stiffness, preload class A:52 N/µm; Basic dynamic load rating C:7.15 kN; B:12 mm; Mass bearing:0.067 kg; rb max.:0.3 mm; Calculation factor f2C:1.06; r3,4 min.:0.3 mm; a:13.2 mm; D2:36.5 mm; Ball diameter Dw:6.35 mm;

Sealed Speed Rating n3:12000 rpm; Oil Speed Rating n2:20000 rpm; d:17.000 mm; Grease Speed Rating Open/Shielded n1:17000 rpm; Basic Static Radial Load Rating Co:4750 N; Basic Dynamic Radial Load Rating C:9560 N; Fillet Radius ra:0.64 mm; B:12.00 mm; Accessories:Two Seals & Snap-Rin; Oil Speed Rating Open/Shielded n2:20000 rpm;

rs (min):6 mm; Oil:822.160 kN; d:400 mm; B:250 mm; Pu:5410 kN; Grease:11150 kN; with cylindrical bore:180 min-1; Dynamic (Cr):12 mm; Static (Cor):22.3 mm; with tapered bore:240 min-1;

d1 ≈:740 mm; Thrust factor K:1.84; D1 ≈:905 mm; Calculation factor e:0.31; B:610 mm; Design variant/feature:TQON/GW; Fatigue load limit Pu:2500 kN; T:610 mm; r3,4 min.:10 mm; Comparative axial load rating CFa:679 kN;

Distance J:88.9 mm; Dimension S1:30.0 mm; Dimension H1:49.2 mm; Insert Bearing IB:Stainless Steel; Width A:41.3 mm; Dimension L:114.3 mm; Dimension F:19.1 mm; Basic Dynamic Radial Load Rating C:24700 N; Shaft Diameter D:40 mm; Height H:100.0 mm;

P180°:285 kN; h:79.375 mm; ba:90.487 mm; H1:241.3 mm; Cap bolt, SAE grade:8; Cap bolt recommended tightening torque:4284.4 N·m; Taconite seal (dc shaft position):TER 170; RG:1 NPT; Taconite seal (db shaft position):TER 179; Initial grease fill:2749.95 g;

P180°:285 kN; h:79.375 mm; ba:90.487 mm; H1:241.3 mm; Cap bolt, SAE grade:8; Cap bolt recommended tightening torque:4284.4 N·m; Taconite seal (dc shaft position):TER 170; RG:1 NPT; Taconite seal (db shaft position):TER 179; Initial grease fill:2749.95 g;

Basic Dynamic Radial Load Rating C:33600 N; Fillet Radius ra:1.00 mm; Oil Speed Rating Open/Shielded n2:8500 rpm; d:40.000 mm; B:18.00 mm; Accessories:One Shield; Basic Static Radial Load Rating Co:26500 N; D:80.0000 mm; Grease Speed Rating Open/Shielded n1:7000 rpm;

Oil:7 100 min-1; ra:1 max; d:30 mm; Static (Cor):36.200 kN; da:37 min; Da:65 max; d:30  ; B:30.2 mm; Dynamic (Cr):43.688 kN; Pu:1.645 kN;

Oil:7 100 min-1; ra:1 max; d:30 mm; Static (Cor):36.200 kN; da:37 min; Da:65 max; d:30  ; B:30.2 mm; Dynamic (Cr):43.688 kN; Pu:1.645 kN;

B2 ≈:91 mm; Calculation factor e:0.37; B:69 mm; d2 ≈:123 mm; Basic dynamic load rating C:539 kN; ra max.:2 mm; D:180 mm; D1 ≈:153 mm; b:6 mm; Fatigue load limit Pu:78 kN;