Bearing 430238U

r3,4 min.:0.6 mm; Preload class A GA:200 N; Fatigue load limit Pu:1.93 kN; Attainable speed for grease lubrication:15000 r/min; Preload class D GD:1600 N; ra max.:1 mm; Static axial stiffness, preload class C:173 N/µm; Calculation factor f2A:1; Calculation factor f2D:1.09; D:110 mm;

r3,4 min.:3 mm; Fatigue load limit Pu:112 kN; r1,2 min.:4 mm; Calculation factor Y:1.4; Basic dynamic load rating C:782 kN; rb max.:3 mm; B:73 mm; Reference speed:1700 r/min; D:270 mm; a:64.088 mm;

r2 max.:0.8 mm; Mass needle roller:0.54 g; r1,2 min.:0.2 mm; Dw:2 mm; r1 max.:0.6 mm; Lw:21.8 mm;

Basic Static Radial Load Rating Co:12500 N; Grease Speed Rating n1:14000 rpm; D:42.0000 mm; B:24.00 mm; Oil Speed Rating n2:16000 rpm; Fillet Radius rb:0.30 mm; d:20.000 mm; Fillet Radius ra:0.64 mm; Basic Dynamic Radial Load Rating C:17400 N;

Calculation factor f2B:1.07; Preload class D GD:320 N; Fatigue load limit Pu:0.183 kN; Calculation factor f2D:1.17; Number of balls z:20; Ball diameter Dw:4.762 mm; d:30 mm; Reference grease quantity Gref:0.63 cm³; D1:41.4 mm; rb max.:0.2 mm;

Material constant KM:330; Basic static load rating C0:500 kN; b1:3.9 mm; B:38 mm; dk:53 mm; d:40 mm; b:3.9 mm; d1 ≈:45 mm; rb max.:1 mm; r2 min.:1 mm;

B:54.00 mm; Basic Dynamic Radial Load Rating C:121000 N; Basic Static Radial Load Rating Co:95000 N; Accessories:Two Seals & Snap-Rin; D:130.0000 mm; Fillet Radius ra:2.00 mm; d:60.000 mm; Grease Speed Rating n1:3400 rpm; Sealed Speed Rating n3:3400 rpm; Oil Speed Rating n2:4500 rpm;

d:60.000 mm; Basic Static Radial Load Rating Co:45500 N; Basic Dynamic Radial Load Rating C:58500 N; Oil Speed Rating n2:6700 rpm; B:22.00 mm; Grease Speed Rating n1:5000 rpm; Fillet Radius ra:1.50 mm; D:110.0000 mm;

r3,4 min.:0.6 mm; Preload class A GA:200 N; Fatigue load limit Pu:1.93 kN; Attainable speed for grease lubrication:15000 r/min; Preload class D GD:1600 N; ra max.:1 mm; Static axial stiffness, preload class C:173 N/µm; Calculation factor f2A:1; Calculation factor f2D:1.09; D:110 mm;

r2 max.:0.8 mm; Mass needle roller:0.54 g; r1,2 min.:0.2 mm; Dw:2 mm; r1 max.:0.6 mm; Lw:21.8 mm;

G:Tr 260x4; Nut for removal:HM 3052; G1:20 mm; B1:180 mm; Mass withdrawal sleeve:11.5 kg; Hydraulic nut:HMV 52 E; A:9 mm; d1:220 mm; d:240 mm; B2:195 mm;

Attachment bolt diameter G:15.875 mm; L:225.425 mm; da:44.45 mm; H2:33.337 mm; Limiting speed:5300 r/min; S:0.794 mm; A:63.5 mm; J max.:180.975 mm; Mass bearing unit:4.22 kg; J min.:174.625 mm;

Dimension G:0.6563 in; Pin Dia A1:0.3125 in; Weight W:2.30 lb; Insert Bearing IB:ZMaRC; Width A:1.6250 in; Dimension B:4.7500 in; Dimension D2:3.2500 in; Shaft Diameter D:1 1/2 in; Dimension N:0.7813 in; Dimension C:4.0000 in;

Attachment bolt diameter G:15.875 mm; L:225.425 mm; da:44.45 mm; H2:33.337 mm; Limiting speed:5300 r/min; S:0.794 mm; A:63.5 mm; J max.:180.975 mm; Mass bearing unit:4.22 kg; J min.:174.625 mm;

Material constant KM:330; Basic static load rating C0:500 kN; b1:3.9 mm; B:38 mm; dk:53 mm; d:40 mm; b:3.9 mm; d1 ≈:45 mm; rb max.:1 mm; r2 min.:1 mm;