Bearing LM272249D/LM272210G2+A

G:Tr 260x4; Nut for removal:HM 3052; G1:20 mm; B1:180 mm; Mass withdrawal sleeve:11.5 kg; Hydraulic nut:HMV 52 E; A:9 mm; d1:220 mm; d:240 mm; B2:195 mm;

r2 max.:0.8 mm; Mass needle roller:0.54 g; r1,2 min.:0.2 mm; Dw:2 mm; r1 max.:0.6 mm; Lw:21.8 mm;

Oil Speed Rating Open/Shielded n2:6700 rpm; Grease Speed Rating Open/Shielded n1:5600 rpm; Sealed Speed Rating n3:3400 rpm; Fillet Radius ra:1.00 mm; Basic Static Radial Load Rating Co:35500 N; d:75.000 mm; D:115.0000 mm; B:20.00 mm; Basic Dynamic Radial Load Rating C:42300 N; Accessories:Two Seals & Snap-Rin;

Housing:SAFS 518; N1:23.813 mm; Adapter sleeve assembly:SNW 18x3.1/8; J min.:263.525 mm; End plug (suffix Y):EPR 11; Stabilizing ring:SR-18-15; h:38.1 mm; ba:40.481 mm; Mass pillow block:30.8 kg; R2:27.781 mm;

Da:150 mm; Stabilizing ring:2 x SR-1614; Ca:60.808 mm; da:70 mm; Cap bolt recommended tightening torque:298.3 N·m; Appropriate attachment bolt size G:0.75 in; R1:53.975 mm; H1:95.25 mm; J min.:250.825 mm; P120°:34.7 kN;

d:60.000 mm; Basic Static Radial Load Rating Co:45500 N; Basic Dynamic Radial Load Rating C:58500 N; Oil Speed Rating n2:6700 rpm; B:22.00 mm; Grease Speed Rating n1:5000 rpm; Fillet Radius ra:1.50 mm; D:110.0000 mm;

Calculation factor f2B:1.07; Preload class D GD:320 N; Fatigue load limit Pu:0.183 kN; Calculation factor f2D:1.17; Number of balls z:20; Ball diameter Dw:4.762 mm; d:30 mm; Reference grease quantity Gref:0.63 cm³; D1:41.4 mm; rb max.:0.2 mm;

r3,4 min.:0.6 mm; Preload class A GA:200 N; Fatigue load limit Pu:1.93 kN; Attainable speed for grease lubrication:15000 r/min; Preload class D GD:1600 N; ra max.:1 mm; Static axial stiffness, preload class C:173 N/µm; Calculation factor f2A:1; Calculation factor f2D:1.09; D:110 mm;

r2 max.:0.8 mm; Mass needle roller:0.54 g; r1,2 min.:0.2 mm; Dw:2 mm; r1 max.:0.6 mm; Lw:21.8 mm;

r2 max.:0.8 mm; Mass needle roller:0.54 g; r1,2 min.:0.2 mm; Dw:2 mm; r1 max.:0.6 mm; Lw:21.8 mm;

Dimension G:0.6563 in; Pin Dia A1:0.3125 in; Weight W:2.30 lb; Insert Bearing IB:ZMaRC; Width A:1.6250 in; Dimension B:4.7500 in; Dimension D2:3.2500 in; Shaft Diameter D:1 1/2 in; Dimension N:0.7813 in; Dimension C:4.0000 in;

Basic Static Radial Load Rating Co:12500 N; Grease Speed Rating n1:14000 rpm; D:42.0000 mm; B:24.00 mm; Oil Speed Rating n2:16000 rpm; Fillet Radius rb:0.30 mm; d:20.000 mm; Fillet Radius ra:0.64 mm; Basic Dynamic Radial Load Rating C:17400 N;

d:60.000 mm; Basic Static Radial Load Rating Co:45500 N; Basic Dynamic Radial Load Rating C:58500 N; Oil Speed Rating n2:6700 rpm; B:22.00 mm; Grease Speed Rating n1:5000 rpm; Fillet Radius ra:1.50 mm; D:110.0000 mm;

Calculation factor f2B:1.07; Preload class D GD:320 N; Fatigue load limit Pu:0.183 kN; Calculation factor f2D:1.17; Number of balls z:20; Ball diameter Dw:4.762 mm; d:30 mm; Reference grease quantity Gref:0.63 cm³; D1:41.4 mm; rb max.:0.2 mm;

d:60.000 mm; Basic Static Radial Load Rating Co:45500 N; Basic Dynamic Radial Load Rating C:58500 N; Oil Speed Rating n2:6700 rpm; B:22.00 mm; Grease Speed Rating n1:5000 rpm; Fillet Radius ra:1.50 mm; D:110.0000 mm;