ZL203-DRS Stud type track rollers

Mass adapter sleeve assembly:0.34 kg; d:55 mm; d1:50 mm; Hydraulic nut:HMV 11 E; B1:45 mm; B:14 mm; Lock nut:KMFE 11; d3:75 mm; G:M 55x2;

Fillet Radius rb:0.60 mm; B:36.00 mm; Basic Dynamic Radial Load Rating C:76100 N; D:130.0000 mm; Basic Static Radial Load Rating Co:104000 N; d:95.000 mm; Fillet Radius ra:1.00 mm; Oil Speed Rating n2:4500 rpm; Grease Speed Rating n1:3800 rpm;

Fatigue load limit Pu:25 kN; ra max.:2 mm; Da max.:483 mm; H:60 mm; D:540 mm; d1 ≈:536 mm; Basic dynamic load rating C:238 kN; Limiting speed:1000 r/min; r1,2 min.:2.1 mm; D1 ≈:444 mm;

Permissible sliding velocity v max.:0.5 m/s; Specific static load factor K0:200 N/mm²; Tolerance shaft:h8; D:190 mm; Mass bushing:2.11 kg; Effective load carrying cross section A:33660 mm²; Specific dynamic load factor K:140 N/mm²; Permissible sliding velocity v min.:0 m/s; B:200 mm; d:170 mm;

P60°:449 kN; RG:1 NPT; J1:139.7 mm; Cap bolt recommended tightening torque:1017 N·m; da:184.15 mm; PosiTrac Plus contact element:2 x B10724-161; Da:419.999 mm; L:869.95 mm; Max. speed for PosiTrac Plus seal:800 r/min; Cap bolt, SAE grade:5;

Da:74.6 mm; Thread grub screw G2:M6x0.75; L:95 mm; A1:15 mm; End cover:ECY 205; A3:3.2 mm; Fatigue load limit Pu:0.335 kN; Recommended diameter for attachment bolts, mm G:10 mm; Housing:FYK 505; N:12.3 mm;

Da:74.6 mm; Thread grub screw G2:M6x0.75; L:95 mm; A1:15 mm; End cover:ECY 205; A3:3.2 mm; Fatigue load limit Pu:0.335 kN; Recommended diameter for attachment bolts, mm G:10 mm; Housing:FYK 505; N:12.3 mm;

B:6.00 mm; Sealed Speed Rating n3:18000 rpm; Oil Speed Rating Open/Shielded n2:36000 rpm; D:24.0000 mm; Fillet Radius ra:0.30 mm; Grease Speed Rating Open/Shielded n1:30000 rpm; Accessories:Two Shields; Basic Dynamic Radial Load Rating C:2910 N; d:12.000 mm; Basic Static Radial Load Rating Co:1500 N;

Taconite seal (dc shaft position):TER 134; H2:63.5 mm; h:50.8 mm; Pa:62.3 kN; Max. speed for Taconite seal:460 r/min; Appropriate attachment bolt size G:1 in; A1:158.75 mm; Taconite seal (db shaft position):TER 151; db:168.275 mm; J max.:463.55 mm;

Da:74.6 mm; Thread grub screw G2:M6x0.75; L:95 mm; A1:15 mm; End cover:ECY 205; A3:3.2 mm; Fatigue load limit Pu:0.335 kN; Recommended diameter for attachment bolts, mm G:10 mm; Housing:FYK 505; N:12.3 mm;

Da:74.6 mm; Thread grub screw G2:M6x0.75; L:95 mm; A1:15 mm; End cover:ECY 205; A3:3.2 mm; Fatigue load limit Pu:0.335 kN; Recommended diameter for attachment bolts, mm G:10 mm; Housing:FYK 505; N:12.3 mm;

Appropriate attachment bolt size G:1 in; Ca:102.794 mm; Labyrinth ring:2 x LOR 147; Cap bolt:4 x 3/4-10 UNC; Max. speed for PosiTrac Plus seal:875 r/min; Cap bolt recommended tightening torque:203.4 N·m; R1:104.775 mm; A2:222.25 mm; L:558.8 mm; End plug (suffix Y):EPR 19;

Taconite seal (dc shaft position):TER 134; H2:63.5 mm; h:50.8 mm; Pa:62.3 kN; Max. speed for Taconite seal:460 r/min; Appropriate attachment bolt size G:1 in; A1:158.75 mm; Taconite seal (db shaft position):TER 151; db:168.275 mm; J max.:463.55 mm;

Basic Dynamic Radial Load Rating C:104000 N; Grease Speed Rating Open/Shielded n1:4500 rpm; Oil Speed Rating n2:5300 rpm; Grease Speed Rating n1:4500 rpm; B:35.00 mm; Oil Speed Rating Open/Shielded n2:5300 rpm; Sealed Speed Rating n3:3000 rpm; Fillet Radius ra:2.00 mm; Accessories:Shield & Seal; D:150.0000 mm;

Basic Dynamic Radial Load Rating C:270000 N; Fillet Radius rb:1.00 mm; Basic Static Radial Load Rating Co:305000 N; d:105.000 mm; Oil Speed Rating n2:3000 rpm; Grease Speed Rating n1:2600 rpm; B:72.00 mm; Fillet Radius ra:2.00 mm; D:190.0000 mm;